Wie behebe ich the SMSwrappers assembly error?

Re-download the Forefront Endpoint Protection 2012 installation package from the original source and extract it to a new folder. If the error persists, verify that SCCM 2007 SP2 or SCCM 2012 is installed as a prerequisite, check that .NET Framework 4.0 is installed, and run the installer as administrator.

Was sind die Voraussetzungen für Forefront Endpoint Protection 2012?

Forefront Endpoint Protection 2012 requires System Center Configuration Manager 2007 SP2 or SCCM 2012, .NET Framework 4.0, Windows Server 2008 SP2 or R2, and the SCCM admin console must be installed on the server where you run the FEP setup.

Forefront 2012 Beta installation starts with error: Could not load file or assembly 'SMSwrappers, version = 3.0.0.0, culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.

Q: Was verursacht the 'Could not load file or assembly SMSwrappers' error in Forefront 2012?

The most common cause is a corrupted or incomplete download of the Forefront Endpoint Protection 2012 installation files. The SMSwrappers.dll is a wrapper library for System Center Configuration Manager (SCCM) SMS Provider functionality. If the download was interrupted or the ZIP extraction failed, this DLL may be missing or corrupted. It can also occur if SCCM prerequisites are not properly installed.

Understanding the Error

When attempting to install Forefront Endpoint Protection (FEP) 2012 Beta, the setup wizard may immediately display the following runtime error:

Setup encountered the following runtime error.
Error Message: Could not load file or assembly 'SMSwrappers,
version = 3.0.0.0, culture=neutral,
PublicKeyToken=31bf3856ad364e35' or one of its dependencies.
The system cannot find the file specified.

This error prevents the installation wizard from even starting. The SMSwrappers.dll is a managed assembly that provides wrapper classes around the System Center Konfiguration Manager (SCCM) SMS Provider interfaces. It is a core dependency of the FEP installer because Forefront Endpoint Protection integrates directly with SCCM.

Common Causes

1. Corrupted or Incomplete Download

The most frequent cause of this error is a corrupted installation package. If the download of the FEP 2012 installer (typically a ZIP file) was interrupted or the file was damaged during transfer, the extracted contents may be missing critical DLLs including SMSwrappers.dll.

2. Missing SCCM Voraussetzungen

Forefront Endpoint Protection 2012 is designed to be installed on top of an existing SCCM infrastructure. The SMSwrappers.dll is normally provided by the SCCM installation. If SCCM is not installed, or if its components are not accessible from the path where the FEP installer runs, the assembly will not be found.

3. .NET Framework Version Issues

The SMSwrappers.dll requires .NET Framework 4.0. If only .NET 3.5 or an earlier version is installed, the assembly loader may fail to load the DLL even if the file exists.

4. Incorrect Installation Path or Extraction

If the ZIP file was extracted to a path with special characters, very long path names, or into a protected directory, the installer may not be able to locate its own DLLs.

5. Missing or Corrupted SCCM Admin Console

The SCCM admin console installs several assemblies that FEP depends on. If the console was partially installed or its assemblies are corrupted, FEP setup will fail.

Voraussetzungen for Forefront Endpoint Protection 2012

Before installing FEP 2012, ensure all prerequisites are in place:

Server Anforderungen

Requirement	Details
Operating System	Windows Server 2008 SP2 or Windows Server 2008 R2
SCCM	System Center Konfiguration Manager 2007 SP2 or SCCM 2012
.NET Framework	4.0 or later
SCCM Admin Console	Must be installed on the FEP installation server
Disk Space	Minimum 2 GB free space
Permissions	Local administrator and SCCM administrator

Verify .NET Framework Installation

# Check installed .NET Framework versions
Get-ChildItem "HKLM:\SOFTWARE\Microsoft\NET Framework Setup\NDP" -Recurse |
    Get-ItemProperty -Name Version, Release -ErrorAction SilentlyContinue |
    Where-Object { $_.PSChildName -match '^(?!S)\p{L}'} |
    Select-Object PSChildName, Version

Verify SCCM Installation

# Check if SCCM is installed
Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\SMS\Setup" -ErrorAction SilentlyContinue |
    Select-Object "Installation Directory", "Full Version"

# Verify the SMSwrappers DLL exists in SCCM installation
$sccmPath = (Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\SMS\Setup" -ErrorAction SilentlyContinue)."Installation Directory"
if ($sccmPath) {
    Test-Path "$sccmPath\bin\i386\SMSwrappers.dll"
}

Fix 1: Re-Download the Installation Package

The simplest and most common fix is to download the FEP 2012 installation files again:

Delete the existing extracted installation files
Delete the downloaded ZIP file
Re-download the FEP 2012 installer from the original source (Microsoft Volume Licensing Service Center or MSDN)
Verify the file hash if Microsoft provides a checksum:

Get-FileHash -Path "C:\Downloads\FEP2012.zip" -Algorithm SHA256

Extract to a short, simple path without spaces or special characters:

C:\FEP2012\

Run the installer as administrator from the new extraction path

Fix 2: Verify SCCM Installation Integrity

If re-downloading does not resolve the issue, the problem may be with the SCCM installation:

Check SCCM Components

:: Verify the SMS Provider is working
wbemtest

In WBEMTest:

Click Connect
Enter the namespace: root\sms\site_<SITECODE> (replace with your site code)
If the connection succeeds, the SMS Provider is functional

Repair the SCCM Admin Console

Open Programs and Features (Control Panel > Programs > Uninstall a Program)
Find System Center Konfiguration Manager Console
Click Repair
Wait for the repair to complete
Retry the FEP 2012 installation

Reinstall the SCCM Admin Console

If repair does not work:

Uninstall the SCCM admin console from Programs and Features
Navigate to the SCCM installation media
Run AdminConsole\ConsoleSetup.exe
Complete the installation
Verify SMSwrappers.dll exists in the SCCM bin directory

Fix 3: Manually Register the Assembly

If the DLL exists on the system but is not found by the installer, you can manually register it:

:: Find the SMSwrappers.dll
dir /s C:\*.SMSwrappers.dll

:: If found, register it in the GAC
gacutil /i "C:\Program Files\Microsoft Configuration Manager\AdminConsole\bin\SMSwrappers.dll"

Or set an assembly probing path:

<!-- Create a FEP2012.exe.config file next to the installer -->
<configuration>
  <runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
      <probing privatePath="bin;lib;C:\Program Files\Microsoft Configuration Manager\AdminConsole\bin" />
    </assemblyBinding>
  </runtime>
</configuration>

Fix 4: Check and Clean the .NET Assembly Cache

A corrupted .NET assembly cache can cause assembly loading failures:

:: Clear the .NET native image cache
ngen update

:: Clear temporary ASP.NET files (if applicable)
rd /s /q %WINDIR%\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files
rd /s /q %WINDIR%\Microsoft.NET\Framework64\v4.0.30319\Temporary ASP.NET Files

Fix 5: Install in the Correct Order

The installation order matters for SCCM and FEP:

Windows Server 2008 SP2 or R2 with all updates
.NET Framework 4.0 (if not already included with the OS)
SQL Server for SCCM database
SCCM 2007 SP2 or SCCM 2012 (full server installation)
SCCM Admin Console on the server where FEP will be installed
Forefront Endpoint Protection 2012

If you try to install FEP before SCCM or its admin console, the SMSwrappers.dll will not be available.

Fix 6: Registry Cleanup for Failed Installations

If a previous FEP installation attempt failed and left behind registry entries, clean them up:

# Check for existing FEP registry entries
Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Forefront Endpoint Protection" -ErrorAction SilentlyContinue
Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\Microsoft Forefront\*" -ErrorAction SilentlyContinue

# Remove leftover entries (back up the registry first)
reg export "HKLM\SOFTWARE\Microsoft\Forefront Endpoint Protection" C:\backup\fep-reg-backup.reg
reg delete "HKLM\SOFTWARE\Microsoft\Forefront Endpoint Protection" /f

Also check for leftover MSI entries:

# List installed products related to Forefront
Get-WmiObject Win32_Product | Where-Object { $_.Name -like "*Forefront*" } |
    Select-Object Name, Version, IdentifyingNumber

Remove any partial installations through Programs and Features or using msiexec:

msiexec /x {ProductGUID} /qn

Fehlerbehebung the Assembly Loading

If you need to determine exactly why the assembly is failing to load, enable the .NET Fusion Log Viewer:

Enable Assembly Binding Logging

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fusion]
"ForceLog"=dword:00000001
"LogFailures"=dword:00000001
"LogResourceBinds"=dword:00000001
"LogPath"="C:\\FusionLogs\\"

Create the log directory:

mkdir C:\FusionLogs

Run the FEP installer again, then examine the logs in C:\FusionLogs\ for detailed information about where the runtime looked for SMSwrappers.dll and why it failed.

Wichtig: Disable Fusion logging after troubleshooting, as it generates large amounts of log data:

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fusion]
"ForceLog"=dword:00000000

Zusammenfassung

The “Could not load file or assembly SMSwrappers” error during Forefront Endpoint Protection 2012 installation is most commonly caused by a corrupted download. Re-downloading and re-extracting the installation files to a clean directory resolves the issue in most cases. If the problem persists, verify that SCCM and its admin console are properly installed (since SMSwrappers.dll is an SCCM component), ensure .NET Framework 4.0 is available, check the installation order, and use the Fusion Log Viewer to trace exactly where the assembly loading fails.