Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the hueman domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/CloudIngenium.com/htdocs/wp-includes/functions.php on line 6114
Google IP address ranges – Knowledge eXchange

Knowledge eXchange

A site dedicated to Exchanging Knowledge (reviews, q&a, help, support)

Google IP address ranges

by · August 9, 2016

Google IP address ranges

Recently I decided to try the Google Compute Engine Cloud, and one of the things I liked right from the beginning was the ability to connect via SSH to your Ubuntu box. I am going to have to read a bit more about it but basically it seems like it generates a keypair, sets it up on your server and then opens a terminal connection via ssh on your web browser… how cool is that?! In my case I wanted to increase the security by limiting the IP addresses that can access the SSH port. Here is where this post comes along. If you look at the documentation basically it says you need to allow all Google IP addresses because the web client may connect from any Google IP… I know, a lot of IPs to authorize but I guess it is better than opening the port to all IP addresses in the world. I am probably going to enable and disable the rule manually but open it to all Google IP addresses for convenience of using the web client to initiate an ssh connection.

The ranges

Well, the IP ranges that Google owns/manages vary throughout time. Fortunately, there are ways to obtain the lates versions at any given point. Unfortunately, I am not sure how can you dynamically update them in the Google Cloud Engine’s firewall rules so I am manually adding them. In order to identify them I am relying on the spf record google offers: _spf.google.com

Here is the information I’ve found at the time of writting:

v=spf1 include:_netblocks.google.com include:_netblocks2.google.com include:_netblocks3.google.com ~all
Prefix Type Value PrefixDesc Description
v version spf1 The SPF record version
+ include _netblocks.google.com Pass The specified domain is searched for an ‘allow’.
+ include _netblocks2.google.com Pass The specified domain is searched for an ‘allow’.
+ include _netblocks3.google.com Pass The specified domain is searched for an ‘allow’.
~ all SoftFail Always matches. It goes at the end of your record. 
v=spf1 ip4:64.18.0.0/20 ip4:64.233.160.0/19 ip4:66.102.0.0/20 ip4:66.249.80.0/20 ip4:72.14.192.0/18 ip4:74.125.0.0/16 ip4:108.177.8.0/21 ip4:173.194.0.0/16 ip4:207.126.144.0/20 ip4:209.85.128.0/17 ip4:216.58.192.0/19 ip4:216.239.32.0/19 ~all
Prefix Type Value PrefixDesc Description
v version spf1 The SPF record version
+ ip4 64.18.0.0/20 Pass Match if IP is in the given range
+ ip4 64.233.160.0/19 Pass Match if IP is in the given range
+ ip4 66.102.0.0/20 Pass Match if IP is in the given range
+ ip4 66.249.80.0/20 Pass Match if IP is in the given range
+ ip4 72.14.192.0/18 Pass Match if IP is in the given range
+ ip4 74.125.0.0/16 Pass Match if IP is in the given range
+ ip4 108.177.8.0/21 Pass Match if IP is in the given range
+ ip4 173.194.0.0/16 Pass Match if IP is in the given range
+ ip4 207.126.144.0/20 Pass Match if IP is in the given range
+ ip4 209.85.128.0/17 Pass Match if IP is in the given range
+ ip4 216.58.192.0/19 Pass Match if IP is in the given range
+ ip4 216.239.32.0/19 Pass Match if IP is in the given range
~ all SoftFail Always matches. It goes at the end of your record. 
v=spf1 ip6:2001:4860:4000::/36 ip6:2404:6800:4000::/36 ip6:2607:f8b0:4000::/36 ip6:2800:3f0:4000::/36 ip6:2a00:1450:4000::/36 ip6:2c0f:fb50:4000::/36 ~all
Prefix Type Value PrefixDesc Description
v version spf1 The SPF record version
+ ip6 2001:4860:4000::/36 Pass Match if IP is in the given range
+ ip6 2404:6800:4000::/36 Pass Match if IP is in the given range
+ ip6 2607:f8b0:4000::/36 Pass Match if IP is in the given range
+ ip6 2800:3f0:4000::/36 Pass Match if IP is in the given range
+ ip6 2a00:1450:4000::/36 Pass Match if IP is in the given range
+ ip6 2c0f:fb50:4000::/36 Pass Match if IP is in the given range
~ all SoftFail Always matches. It goes at the end of your record. 
v=spf1 ip4:172.217.0.0/19 ~all
Prefix Type Value PrefixDesc Description
v version spf1 The SPF record version
+ ip4 172.217.0.0/19 Pass Match if IP is in the given range
~ all SoftFail Always matches. It goes at the end of your record.

So there you have it. The first block is called netblocks which contains all the blocks in the IPv4 space, then you have netblocks2 which contains all the blocks in the IPv6 space… which leaves netblocks3 which contains an IPv4 address range but I am not sure why not simply include it in netblocks. If anyone knows the reason or has a good guess please share!

If you wish to query this information anytime yourself, you can do it querying the Google DNS servers like so:

 

nslookup -q=TXT _spf.google.com 8.8.8.8

nslookup -q=TXT _netblocks.google.com 8.8.8.8

nslookup -q=TXT _netblocks2.google.com 8.8.8.8

nslookup -q=TXT _netblocks3.google.com 8.8.8.8

 

So it is possible to automate the update of the ranges via a shell script for example… or an API call… but for me I think it is not necessary seeing updates shouldn’t happen too often and if there is an issue I can always update as required.

Tags:

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.